You must change the gas regulator usually found at the back of the equipment. Reassemble the unit the same way you took it apart (you are almost done!)ģ. Replace the pilot orifice and reassemble. When the tube is pulled out, the orifice should fall out if it does not, tap the pilot assembly. Unscrew the nut and pull the tube out of the pilot assembly. The pilot tube is attached to the pilot with a nut. If you are converting an oven, you also need to change the pilot orifice. Remove the old orifices and install the new orifices (orifices are screwed to the end of the valve).Ģ. The burner valves do not need to be removed. Begin by removing all the burners and then remove what is needed to be removed in order to access the burner valves.
The conversion can take some time because whatever piece of equipment you are converting has to be dismantled and then reassembled. The conversion kits can be more expensive than using individual parts. The conversion can be done one of two ways: either by using the manufacturer’s conversion kit or with individual parts. You will also need to know the number of top burners as well as any other burners such as oven burners and the number of oven pilots (if you are converting a range). This will determine what orifice size you will need. Next thing you will need to know is what altitude the unit you are converting is at.
#TUNDRA AMP STEPS SERIAL NUMBERS#
First, the most important thing you need to know is the brand name, model and serial numbers of your unit. Nomenclature (tag on unit that has model and serial number on it).ĪLWAYS REMEMBER TO TURN OFF ALL GAS TO THE UNIT!!ġ.Combination Safety Valve conversion kit.Converting any piece of gas equipment from natural gas to propane or from propane to natural gas is fairly simple and can be accomplished in 5 easy steps.
0 kommentar(er)
